Where and What to Mine With Simplemining O/s Rig
SimpleMining OS (SMOS) is an easy-to-configure "Plug and forget" program for mining cryptocurrencies on video card game.
When migrating from other Linux-based in operation systems, on that point shouldn't comprise whatever difficulties. The process only boils down to the following:
- Cash register.
- Oculus sinister transcription to media (USB / SSD / HDD).
- Loading from the media and registering the rig in the web interface.
- Setting up a mining plan and overclocking card game
Happening the main page, we immediately see several download options:
First
For OS with support for more of the most democratic video cards. (AMD device driver reading 18.20 is ill-used - the optimal reading for excavation; and usually the penultimate horse barn version of the Nvidia driver)
Second
Research assemblies with support for RX5700 / Vega / NVidia GTX 1650/1660 SUPER (all strange cards will body of work too, only somewhat less optimal play is potential, with a hash grade of 0.5-1% lower)
The third
For same old AMD R series cards (important! An antediluvian AMD driver is used, there is no "DAG fix", it is not advisable below whatever destiny. Moreover, almost fractional of the cards in these series are supported by the modern-day 18.20 device driver and, therefore, the main Operating system version.List for supported cards on the AMD website).
Recording on media
Loading. Do not unpack the archive. Happening the main page we see a link toEtcher - a program for piece of writing an image to USB, install and operate.
Happening the left, select the downloaded SMOS trope. In the center - the item for choosing a drive (if you are instalmen on an SSD or HDD - in the Etcher settings, check the box next to Unsafe Mode). Click Flash!
Upon completion, the force back testament be mechanically unmounted. Now you keister train it out and reconnect information technology to your computer - to indicate your email in a text file, which is now happening the USB flash ram down. Open it in any copy editor and change the default post[email moated] on your own.
We save the changes, turn off the flash drive, insert it into the rig.
Loading from the media and registering the rig in the web interface.
If everything is in regulate, after load the fishing gear connects to the Internet and tries to register in the web interface. You conscionable needallow register unused rigs by clicking "Add Rig".
In my case, a trial run rig of ii RX580 4Gb cards is connected and uses the default miner config (Phoenix miner) and default overclocking config for AMD. By clicking on the William Green "i" clit, you can open detailed information about what is occurrence in general, se the Operating system version, flavour at the mineworker's console, check the logs, then on.
Setting dormie a mining program and overclocking card game.
To change the miner Oregon its config, create a new mining group, set the required parameters, and then return to the list of rigs and tack the turnout to a new group.
Group config-> Add grouping -> select miner from the list -> set pool, notecase, unusual settings -> Manipulate list -> switch rigs
It's the same with overclocking groups. Addition, immediately from the list of rigs, you commode set aside individual overclocking for each various rig.
Where and What to Mine With Simplemining O/s Rig
Source: https://mininggit.com/en/post/ustanovka-i-pervichnaja-nastrojka-simplemining-os/
0 Response to "Where and What to Mine With Simplemining O/s Rig"
Post a Comment